Kestrel Labs
Resources News & Updates This post

[ News & Updates · Press ]

BIG SEE features the Kestrel Platform.

The Southeast European architecture and design platform profiles Kestrel in its Innovations section, under the title “A code check that stays attached to the model.”

Outlet
BIG SEE
Section
Innovations · Practice
Published
November 2026
Edited by
Tanja Završki

BIG SEE, the Ljubljana-based platform behind the BIG SEE architecture, interior and product design awards, has published a feature on the Kestrel Platform in the Innovations section of its magazine. The piece is edited by Tanja Završki.

Kestrel Labs inside Autodesk Revit on the Snowdon Towers sample model: a door fire rating versus wall rating check under IBC 2021 Table 716.1(2) reports 38 elements, with door S11A in a 4-hour rated wall recording no rating where at least 3 hours is required.
The feature’s cover image: a Kestrel door fire-rating check inside Revit on Autodesk’s Snowdon Towers sample model.

What the BIG SEE feature covers

The feature’s argument is about timing. A code check is most useful when it enters the design process while the design can still change. The piece walks through how Kestrel does that: checks run inside Autodesk Revit in about 30 seconds, each finding is mapped to the model element that triggered it, and each one cites the applicable code section. The examples are the simple conditions every project has: a door too narrow for an egress route, a stair without the required clear width, a fire-rated wall whose door does not match its rating.

Two points in the piece are ones we care about. The first is that not every open condition is a violation. Kestrel separates violations from passed checks, exemptions, and cases where the model does not hold enough data to evaluate a requirement. BIG SEE notes why that matters in BIM: an element can look complete on screen and still lack the data a reliable check needs. The second is where responsibility sits. The feature describes Kestrel as “a first-pass compliance tool, not as an automated approval authority.” Interpretation and the architect’s judgement stay in the process, which is the position we set out in Where AI does not belong.

The piece also covers the workflow beyond Revit: the browser-based Kestrel Portal, where project managers and QA reviewers examine findings without opening the model, and cloud checks through Autodesk Forma, now rolling out to selected early customers. It closes with a note that our code content is licensed from the International Code Council and that coverage is expanding, so practices outside the United States should confirm the codes, editions and jurisdictions supported before adopting it. That is fair advice, and we will answer the question for any firm that asks.

Why coverage from BIG SEE matters to us

BIG SEE writes for architects across Southeast Europe and runs the region’s best-known design awards. Its readers work under different codes from the IBC, but the problem is the same: compliance arrives as a late checkpoint, after the decisions that caused the issue are months old. The feature’s closing line is the idea we are building toward. When a stair width, a door rating or an accessibility requirement is visible beside the decision it affects, compliance stops being a final checkpoint and becomes part of designing. That is the case we make in Compliance isn’t a milestone and in How building code compliance is moving into the BIM model.

Thanks to Tanja Završki and the BIG SEE team for the feature.

Read the feature: Kestrel Platform: A Code Check That Stays Attached to the Model, BIG SEE →

Want to see the check in the cover image run on a model like yours? Schedule a demo →